16A type 2 EV Charger with Delay Charging function for Electric Vehicle Charging

Short Description:

Rated current: 6A / 8A / 10A / 13A / 16A ( Optional )

Operating voltage: 110V~250V AC

Delay Charging: 1-12Hour

Insulation resisitance:>1000MΩ
Therminal temperature rise:<50K
Withstand voltage:2000V
Working temperature: -30°C ~+50°C
Contact impedance: 0.5m Max

Send email to us

Product Detail

Product Tags

Charging Equipment

Charging equipment for EVs is classified by the rate at which the batteries are charged. Charging times vary based on how depleted the battery is, how much energy it holds, the type of battery, and the type of charging equipment (e.g., charging level, charger power output, and electrical service specifications). The charging time can range from less than 20 minutes to 20 hours or more, depending on these factors. When choosing equipment for a specific application, many factors, such as networking, payment capabilities, and operation and maintenance, should be considered.

The portable electric car charger belongs to the LEVEL 2 AC charger, and the charging power is generally 3.6kW-22kW. In order to prevent potential safety hazards due to incorrect use, please read the equipment manual carefully before use. Do not charge in places that do not meet the charging conditions. Ensure that the power supply and wiring are in a normal state before use.

AC Level 2 equipment (often referred to simply as Level 2) offers charging through 240 V (typical in residential applications) or 208 V (typical in commercial applications) electrical service. Most homes have 240 V service available, and because Level 2 equipment can charge a typical EV battery overnight, EV owners commonly install it for home charging. Level 2 equipment is also commonly used for public and workplace charging. This charging option can operate at up to 80 amperes (Amp) and 19.2 kW. However, most residential Level 2 equipment operates at lower power. Many of these units operate at up to 30 Amps, delivering 7.2 kW of power. These units require a dedicated 40-Amp circuit to comply with the National Electric Code requirements in Article 625. As of 2021, over 80% of public EVSE ports in the United States were Level 2.

Item	Mode 2 EV Charger Cable
Product Mode	MIDA-EVSE-PE16
Rated Current	8A / 10A / 13A / 16A ( Optional )
Rated Power	Max 3.6KW
Operation Voltage	AC 110V ~250 V
Rate Frequency	50Hz/60Hz
Withstand Voltage	2000V
Contact Resistance	0.5mΩ Max
Terminal Temperature Rise	＜50K
Shell Material	ABS and PC Flame Retardant Grade UL94 V-0
Mechanical Life	No-Load Plug In / Pull Out ＞10000 Times
Operating Temperature	-25°C ~ +55°C
Storage Temperature	-40°C ~ +80°C
Protection Degree	IP65
EV Control Box Size	248mm (L) X 104mm (W) X 47mm (H)
Standard	IEC 62752 , IEC 61851
Certification	TUV,CE Approved
Protection	1.Over and under frequency protection 3.Leakage Current Protection (restart recover） 5.Overload protection (self-checking recover) 7.Over voltage and under-voltage protection 2. Over Current Protection 4. Over Temperature Protection 6. Ground Protection and Short circuit protection