head_banner

200A 250A 750V DC GBT Plug EV Charging Connector Chinese Standard Electric Car Charging Plugs

Short Description:

Products Type
MIDA-GBT-EV80P MIDA-GBT-EV150P
MIDA-GBT-EV200P MIDA-GBT-EV250P
Rated current : 80A 125A 200A 250A
Operating voltage : 750V/1000V DC
Insulation resistance : >2000MΩ (DC1000V)
Terminal temperature rise :<50K
Withstand voltage :3200V
Vibration resistance :Meet JDQ 53.3 requirements
Contact impedance:0.5MΩ Max
GBT EV Charging Plug 250A DC GBT socket
DC GBT charging 750V 250A GBT DC Charging


Product Detail

Product Tags

Detailed dimensions

Features
1. Meet GB/T 20234.2-2015 regulations and requirements
2. Nice appearance,hand-held ergonomic design,easy plug
3. Safety pins insulated head design to prevent accidental diirecrt contact with staff
4. Excellent protection performance,protection grade IP55(working condition)
Mechanical properties
1. Mechanical life : no-load plug in/pull out>10000 times
2. Impat of external force:  can afford 1m drop and 2t vehicle run over pressure
Electrical Performance
1. Rated current:80A/125A/200A/250A
2. Operation voltage: 750V
3. Insulation resistance:>2000MΩ(DC500V)
4. Terminal temperature rise:<50K
5. Withstand Voltage :5000V
6. Contact Resistance: 0.5mΩ Max
Applied Materials
1. Case Material: Thermoplastic,flame retardant grade UL94 V-0
2. Pin:Copper alloy,silver + thermoplastic on the top
Environmental performance
1. Operating temperature:-30℃~+50℃

 Model selection and the standard wiring

Model Rated current Cable specification
NV3-DSD-EV80P 80A 3 X 16mm² + 2 X 4mm² + 2P(4 X 0.75mm²)+ 2P(2 X 0.75mm²)
NV3-DSD-EV125P 125A 2 X 35mm² + 1 X 16mm²  + 2 X 4mm² + 2P(4 X 0.75mm²)+ 2P(2 X 0.75mm²)
NV3-DSD-EV200P 200A 2 X 70mm² + 1 X 25mm²  + 2 X 4mm² + 2P(4 X 0.75mm²)+ 2P(2 X 0.75mm²)
NV3-DSD-EV250P 250A 2 X 80mm² + 1 X 25mm²  + 2 X 4mm² + 2P(4 X 0.75mm²)+ 2P(2 X 0.75mm²)

 

 GB/T standard

On December 28, 2015, five newly revised national standards for charging interfaces and communication protocols for electric vehicles were issued in Beijing by the Standardization Administration of the Chinese General Administration of Quality Supervision, Inspection and Quarantine together with the National Energy Administration, the Ministry of Industry and Information Technology and the Ministry of Science and Technology. The new standards took effect on January 1, 2016. The GB/T standard is divided into three parts: the general requirements, AC and DC and the communication between the charger and BMS, specifically listed as follows:

 (1) GB/T 18487.1-2015 Conducting Charging Systems for Electric Vehicles – Part 1: General Requirements

 (2) GBT/T 20234.1-2015 Connectors for Conducting Charging for Electric Vehicles – Part 1: General Requirements

 (3) GB/T 20234.2-2015 Connectors for Conducting Charging for Electric Vehicles – Part 2: Alternating Current Charging Interfaces

 (4) GB/T 20234.3-2015 Connectors for Conducting Charging for Electric Vehicles – Part 3: Direct Current Charging Interfaces

 (5) GB/T 27930-2015 Communication Protocol between Off-board Conductive Charger and Battery Management System of Electric Vehicle

 The introduction of GB/T standard improves the safety and compatibility of charging.

 


  • Previous:
  • Next:

  • Leave Your Message:

    Write your message here and send it to us
    • Follow us:
    • facebook
    • linkedin
    • twitter
    • youtube
    • instagram

    Leave Your Message:

    Write your message here and send it to us