500A CCS2 Plug Liquid Cooling Charging Connector CCS2 300A 350A CCS2

500A CCS2 Plug Liquid Cooling Charging Connector

Liquid cooling is one of the best solutions. European standard DC charging gun DC+, DC- cables, can be made into liquid cooled cables. The soft conductor of the cable and the European standard DC charging gun jack type liquid cooling terminal are fed into the circulating coolant. The heat generated by the soft wire and jack type liquid cold terminal during the charging process is carried away by the circulating coolant. This can greatly improve the carrying current of the software wire, jack type liquid cold terminal. The volume of the cable does not increase compared with that of the dry cable, which meets both human engineering and application requirements. The European standard IEC 62196-3 liquid cooled cable for DC charging gun is an integrated cable with nine wires inside the insulation: one DC+, one DC-liquid cooled cable; PE ground wire one; The other six are signal wires. One DC+ cable and one DC-liquid cooled cable are connected to the European standard DC charging gun jack type liquid cooled terminal. The structure of the DC+ and DC- jack type liquid cooled terminals is the same. The DC+ and DC-liquid cooled cables are installed in the European standard DC charging gun. The other end of the DC+ and DC-liquid cooled cables is an electrode. The structure of the DC+ and DC-liquid cooled cables is the same. Each electrode of the DC+ and DC-liquid cooled cables is provided with an inlet and outlet of the coolant. DC+ and DC- two electrodes are connected to the output end of the power supply of the charging pile.