6A 8A 10A Type 2 to 3 Pin Charging Cable EV Batter Charger for Renault Zoe Electric Car Charging
6A 8A 10A Type 2 to 3 Pin Charging Cable EV Batter Charger for Renault Zoe Electric Car Charging
| Rated Current | 6A / 8A / 10A/ 13A ( Optional ) | ||||
| Rated Power | Max 3.6KW | ||||
| Operation Voltage | AC 110V~250 V | ||||
| Rate Frequency | 50Hz/60Hz | ||||
| Leakage Protection | Type B RCD ( Optional ) | ||||
| Withstand Voltage | 2000V | ||||
| Contact Resistance | 0.5mΩ Max | ||||
| Terminal Temperature Rise | ＜50K | ||||
| Shell Material | ABS and PC Flame Retardant Grade UL94 V-0 | ||||
| Mechanical Life | No-Load Plug In / Pull Out ＞10000 Times | ||||
| Operating Temperature | -25°C ~ +55°C | ||||
| Storage Temperature | -40°C ~ +80°C | ||||
| Protection Degree | IP67 | ||||
| EV Control Box Size | 200mm (L) X 93mm (W) X 51.5mm (H) | ||||
| Weight | 2.1KG | ||||
| OLED Display | Temperature, Charging Time, Actual Current, Actual Voltage, Actual Power, Capacity Charged, Preset Time | ||||
| Standard | IEC 62752 , IEC 61851 | ||||
| Certification | TUV,CE Approved | ||||
| Protection | 1.Over and under frequency protection 2. Over Current Protection 3.Leakage Current Protection (restart recover） 4. Over Temperature Protection 5.Overload protection (self-checking recover) 6. Ground Protection and Short circuit protection 7.Over voltage and under-voltage protection 8. Lighting Protection |
||||
Conventional charging is to use the portable charging equipment equipped with the vehicle for charging, which can use household power supply or special charging pile power supply. The charging current is small, generally about 16-32a. The current can be DC, two-phase AC and three-phase AC. therefore, the charging time is 5-8 hours depending on the capacity of the battery pack.
Most electric vehicles use the power cord of 16A plug, together with appropriate socket and vehicle charger, so that the electric vehicle can be charged at home. It is worth noting that the general household socket is 10a, and the 16A plug is not universal. Need to use the socket of electric water heater or air conditioner. The plug on the power line indicates whether the plug is 10A or 16A. Of course, the charging equipment provided by the manufacturer can also be used.
Although the disadvantages of the conventional charging mode are very obvious and the charging time is long, its requirements for charging are not high, and the charger and installation cost are low; It can make full use of the low power period to charge and reduce the charging cost; The more important advantage is that it can deeply charge the battery, improve the battery charge and discharge efficiency and prolong the battery life.
The conventional charging mode is widely applicable and can be set up at home, public parking lot, public charging station and other places that can be parked for a long time. Due to the long charging time, it can greatly meet the vehicles operating during the day and resting at night.
