head_banner

ACAC Power Module V2G Charging Module Bi-directional DC Charging Module

Short Description:

Voltage range:  Rectifier and grid-connected inverter mode: 150 Vdc ~ 1000 Vdc

Off-grid inverter mode: 200 Vdc ~ 1000 Vdc
Current range: 0~73.3A (Current limiting point can be set)
Rated current: 22A @1000V
maximumoutput: 22kW
Stable pressure accuracy: < ±0.5%
Stable flow accuracy: ≤ ± 1% (20% to 100% output load)
load regulation: ≤±0.5%
Start the overshoot: ≤±3%

Product Detail

Product Tags

ACAC Power Module V2G Charging Module Bi-directional DC Charging Module 

Voltage range:  Rectifier and grid-connected inverter mode: 150 Vdc ~ 1000 Vdc

Off-grid inverter mode: 200 Vdc ~ 1000 Vdc
 
Current range: 0~73.3A (Current limiting point can be set)
Rated current: 22A @1000V
maximumoutput: 22kW
Stable pressure accuracy: < ±0.5%
Stable flow accuracy: ≤ ± 1% (20% to 100% output load)
load regulation: ≤±0.5%
Start the overshoot: ≤±3%
Grid adjustment rate: ± 0.1% (test range of 320V ~485V), rectification mode
Voltage ripple factor: 1% (300~1000V, 0 ~ 20 MHz), rectification mode
 
Cabinet routing and assembly suggestions: 

 

1. Cabinet power wiring and communication line line separately to avoid spatial

 

coupling interference; pay special attention to DC CAN and AC CAN

 

communication bus should not be parallel with the power line.

 

2. The module AC line and DC line inside the system should be tied on both sides of the

 

module plug frame, and should not block the air outlet of the module.

 

As shown below

 

 


  • Previous:
  • Next:

  • Leave Your Message:

    Write your message here and send it to us
    • Follow us:
    • facebook
    • linkedin
    • twitter
    • youtube
    • instagram

    Leave Your Message:

    Write your message here and send it to us