Manufacturer of Ev Cable Type 2 - 3.6kW 16A Type 2 to Type 1 EV Charging Cable 5m cable For Electric Vehicle charging – Mida
Manufacturer of Ev Cable Type 2 - 3.6kW 16A Type 2 to Type 1 EV Charging Cable 5m cable For Electric Vehicle charging – Mida Detail:
Rated Current | 16Amp | 32Amp | |||
Operation Voltage | AC 250V | ||||
Insulation Resistance | >1000MΩ ( DC 500V ) | ||||
Withstand Voltage | 2000V | ||||
Pin Material | Copper Alloy, Silver Plating | ||||
Shell Material | Thermoplastic,Flame Retardant Grade UL94 V-0 | ||||
Mechanical Life | No-Load Plug In / Pull Out >10000 Times | ||||
Contact Resistance | 0.5mΩ Max | ||||
Terminal Temperature Rise | <50K | ||||
Operating Temperature | -30°C~+50°C | ||||
Impact Insertion Force | >300N | ||||
Waterproof Degree | IP55 | ||||
Cable Protection | Reliability of materials,antiflaming,pressure-resistant, abrasion resistance,impact resistance and high oil |
||||
Certification | TUV, UL , CE Approved | ||||
Model | Rated Current | Cable Specification | Cable Color | Cable Length | |
MIDA-EVAE-16A | 16 Amp | 3 X 2.5mm² + 2 X 0.5mm² | Black Orange Green |
(5Meter ,10Meter) The length of the cable can be customized |
|
3x14AWG+1X18AWG | |||||
MIDA-EVAE-32A | 32 Amp | 3 X 6mm²+2 X 0.5mm² | |||
3x10AWG+1X18AWG |
With this cable, you can charge your EV/PHEV that has Type 1 port with an EV charging station that has Type 2 socket. The cable is 16 Amp, single-phase, can charge your EV up to 3.6 kW. The product has a nice appearance, a hand-held ergonomic design and is easy to plug. The working length is 5 meters and is made from thermoplastic material. It has protection level IP55, is anti-flaming, pressure-resistant, abrasion-resistant and impact resistant.
How to use:
We recommend to use the following steps:
1.Plug in the Type 2 end of the cable to the charging station
2.Plug in the Type 1 end of the cable to the car’s charging socket
3.After the cable has clicked in place you are ready for the charge*
*Don’t forget to activate the charging station
When you finish with the charge, disconnect the vehicle side first and then the charging station side. Remove the cable from the charging station when not in use.
How to store:
The charging cable is the lifeline of your electric vehicle and is important to keep it protected. Store the cable in a dry place preferably a storage bag. Moisture in the contacts will result in the cable not working. If this happens place the cable in a warm and dry place for 24 hours. Avoid to leave the cable outside where the sun, wind, dust and rain can get to it. Dust and dirt will result in the cable not charging. For longevity, ensure that your charging cable is not twisted or excessively bent during the storage.
The EV Charging Cable Type 1 to Type 2 16A 1 Phase 5m is very easy to use and store. The cable is designed for both outdoor and indoor charging and it has IP55 (Ingress Protection). This means that it has protection from dust and splash of water from any direction.
Product detail pictures:
Related Product Guide:
As for competitive prices, we believe that you will be searching far and wide for anything that can beat us. We can state with absolute certainty that for such quality at such prices we are the lowest around for Manufacturer of Ev Cable Type 2 - 3.6kW 16A Type 2 to Type 1 EV Charging Cable 5m cable For Electric Vehicle charging – Mida , The product will supply to all over the world, such as: Moldova, Somalia, Canberra, Due to good quality and reasonable prices, our products have been exported to more than 10 countries and regions. We are looking forward to cooperating with all customers from at home and abroad. Moreover, customer satisfaction is our eternal pursuit.
By Kristin from Eindhoven - 2017.04.28 15:45
The enterprise has a strong capital and competitive power, product is sufficient, reliable, so we have no worries on cooperating with them.
By Coral from Sudan - 2018.04.25 16:46