Both CCS (Combined Charging System) and CHAdeMO are fast charging standards for electric vehicles. Charging speed is largely dependent on the capabilities of the particular charger and the EV being charged. In terms of maximum charging power, 500a Ccs2 Plug chargers generally support higher power levels compared to CHAdeMO. CCS chargers can deliver up to 350 kW, which is much faster than most CHAdeMO chargers, which typically deliver up to 50 kW. But it should be noted that the charging speed also depends on the capabilities of the electric vehicle's on-board charging system.
Some EVs may not be able to take full advantage of the maximum power output of the charging station, limiting the charging speed regardless of the charger type. In summary, if both Ccs1 350a and CHAdeMO chargers are capable of delivering maximum power output, the CCS charger tends to be faster. However, the actual charging speed will depend on the specific charger and the capabilities of the EV being charged.
CHAdeMO charging can deliver power at a maximum rate of 50 kW. However, the exact charging speed may vary depending on factors such as the vehicle battery capacity, the power output of the charging station and the efficiency of the charging infrastructure. On average, CHAdeMO charging increases battery capacity by about 80% in about 30 to 60 minutes.
150A 200A CCS 1 Plug DC Fast Charging COMBO 1 Connector for Rapid Charger Station
| Features | 1. Meet 62196-3 IEC 2014 SHEET 3-IIIB standard | ||||||||
| 2. Concise appearance, support back installation | |||||||||
| 3. Back Protection class IP65 | |||||||||
| 4. DC Max charging power: 90kW | |||||||||
| 5. AC Max charging power:41.5kW | |||||||||
| Mechanical properties | 1. Mechanical life : no-load plug in/pull out＞10000 times | ||||||||
| 2. Impat of external force:can afford 1m drop amd 2t vehicle run over pressure | |||||||||
| Electrical Performance | 1. DC input: 80A, 150A , 200A1000V DC MAX | ||||||||
| 2. AC input: 63A 240/415V AC MAX | |||||||||
| 3. Insulation resistance：＞2000MΩ（DC1000V） | |||||||||
| 4. Terminal temperature rise：＜50K | |||||||||
| 5. Withstand Voltage：3200V | |||||||||
| 6. Contact resistance: 0.5mΩ Max | |||||||||
| Applied Materials | 1. Case Material: Thermoplastic,flame retardant grade UL94 V-0 | ||||||||
| 2. Pin：Copper alloy,silver + thermoplastic on the top | |||||||||
| Environmental performance | 1. Operating temperature: -30°C~+50°C | ||||||||
| Model selection and the standard wiring | |||||||||
| Model | Rated current | Cable specigication | Cable Color | ||||||
| MIDA-CSS1-EV150P | 150Amp | 2 X 50mm²+1 X 6mm² +6 X 0.75mm² | Orange or Black | ||||||
Post time: Aug-23-2023
