Portable ev charger GBT Level 2 EV Charger 16A with EU Schuko level 2 ev charging cable
CORE ADVANTAGE
High compatibility
High speed charging
Equipped Type A+6ma DC filter
Automatically Intelligent Repair
Automatically restart function
Over-temperature protection
Full link temperature control system
EV charging mode 2
• Application: Domestic socket and cable with a protection device
• In this mode, vehicle is connected to main power via household socket outlets.
• Recharging can be done using single phase or three phase network having earthing installed.
• Protective device is used in the cable.
• This mode 2 is expensive due to stringent cable specifications.
• The cable in EV charging mode 2 can provide in-cable RCD, over current protection, over temperature protection and protective earth detection.
• Due to above features, power will only be delivered to the vehicle if EVSE has met following few conditions.
-Protective Earth is valid
-No error condition exists such as over current and over temperature etc.
-Vehicle has been plugged in, this can be detected via pilot data line
-Vehicle has requested power, this can be detected via pilot data line
• Mode 2 charging connection of EV to AC supply network does not exceed 32A and does not exceed 250 V AC single phase or 480 V AC.
| Item | Mode 2 EV Charger Cable | ||
| Type | GBT | ||
| Rated Current | 8A / 10A / 13A / 16A ( Optional ) | ||
| Rated Power | Max 3.6KW | ||
| Operation Voltage | AC 110V ~250 V | ||
| Rate Frequency | 50Hz/60Hz | ||
| Withstand Voltage | 2000V | ||
| Contact Resistance | 0.5mΩ Max | ||
| Terminal Temperature Rise | ＜50K | ||
| Shell Material | ABS and PC Flame Retardant Grade UL94 V-0 | ||
| Mechanical Life | No-Load Plug In / Pull Out ＞10000 Times | ||
| Operating Temperature | -25°C ~ +55°C | ||
| Storage Temperature | -40°C ~ +80°C | ||
| Protection Degree | IP65 | ||
| EV Control Box Size | 248mm (L) X 104mm (W) X 47mm (H) | ||
| Standard | IEC 62752 , IEC 61851 | ||
| Certification | TUV,CE Approved | ||
| Protection | 1.Over and under frequency protection 3.Leakage Current Protection (restart recover） 5.Overload protection (self-checking recover) 7.Over voltage and under-voltage protection 2. Over Current Protection 4. Over Temperature Protection 6. Ground Protection and Short circuit protection |
||
EV Charging Modes which include EV charging Mode 1, Mode 2, Mode 3 and EV charging Mode 4. The page describes feature wise difference between EV charging modes.
The charging mode describes protocol between EV and charging station used for safety communication. There are two main methods viz. AC charging and DC charging. The EV charging stations are available to provide charging service to the users of EVs (Electrical Vehicles.)
