TUV EN50620 TPU Sheath 3×4.0mm2+1×0.5mm2 Type 2 EV Charger Cable

3G4.0mm²+2*0.5mm² EV Wire AC EV Cable Leads

Parameters

● Model: 32A/40A wire for Type 2 EV Cable 
● SPEC: 3*4.0mm²+2*0.5mm²
● Reference Standard: TUV 2PfG 1908
● Reted current: 32A/40A
● Working voltage: 450/750V AC
● Bebding Radius: ≥ 8D
● Retarding Test: IEC60332-1
● Smoke Density: IEC61034, EN50268-2
● Stewed acid gas release quantity: IEC670754-1, EN50267-2-1
● Heat, cold, wear-resisting to ozone ultraviolet light
● Working temperature: -45°C ~+ 125°C
● CE, TUV, UL approved

EV charging cables are used to connect electric vehicle charging devices and charging infrastructure to transmit power to electric vehicles and are equipped with a certain amount of signal lines, control lines, power auxiliary lines, etc. to ensure accurate control of the entire charging process and safe operation. Charging cables are generally used in charging stations, parking lots, hotels, communities, garages, and other areas. Portable charging cables can be placed in the car.

32A Single Phase Charging Wire for EV (Electric Vehicle)

●The products are flexible with a good bending radius, surviving from high and low temperature, providing oil resistance, acid and alkali resistance, water resistance, abrasion resistance, crack resistance, UV resistance, good flame retardancy, good electrical conductivity, and insignificant conductor temperature rise.

● Our EV charging cables for electric vehicles support different charging modes in various regions.