V2G Power Module ACAC Bidirectional Power Module BEG1k075
V2G Power Module ACAC Bidirectional Power Module BEG1k075
Product characteristics
1. AC / DC bidirectional transformation, with high-frequency isolation
2. Ultra-wide AC voltage range, meet the national standard, European
standard, American standard application: 260 Vac ~ 530 Vac 3
4. Ultra-wide DC voltage range: 150 Vdc ~ 1000 Vdc
5. Wide working temperature range: -40℃ ~75℃
6. Automatic phase locking and grid connection when connected to the mains electricity
7. Off-grid inverter supports 8 modules and machine
8. Support AC \ dc, side start
9. Support for CAN bus communication
10. Support the DC side voltage regulation, current restriction and flow sharing
functions
11. Support active power and reactive power control on the communication side
12. Support for group control
13., has the high and low pressure crossing function
14. With the function of battery reverse alarm and protection.
BEG1K075 There are three working modes: rectifier, grid-connected inverter and
off-grid inverter, and the working mode of the module can be set through CAN
communication. The working mode of the module can be judged by the panel indicator light: the green light is rectified mode; the green light is 2s, 1s Grid-connected inverter; the green light is on for 1s, 2s is the off-grid inverter mode.
The default setting is rectifier mode. The AC voltage is 260 Vac, 45Hz-65Hz, and
the output DC voltage range is 150 Vdc-1000 Vdc. The output voltage and current can be set through CAN communication to power the DC load or charge the battery. When the CAN communication setting module is working in the grid-connected inverter mode, the module can feedback the energy to the power grid according to the set discharge current. If the mains is not connected, the module can be set as an offgrid inverter, and the module output 220 Vac / 50Hz three phase sine wave is AC negative Carry power supply.
Leave Your Message:
Write your message here and send it to us
